Kinetic study of radical polymerization. II. Solid‐state bulk polymerization of sodium methacrylate by differential scanning calorimetry

The solid‐state radical polymerization of sodium methacrylate was investigated. It was initiated by azobisisobutyronitrile, which was used as a radical initiator. Differential scanning calorimetry (DSC) was used to observe the endothermic and exothermic transitions during the polymerization reaction. Structural studies were performed with the DSC thermograms and Fourier transform infrared and ultraviolet–visible spectra, and all of the results confirmed the progress of the reaction. The obtained data revealed that the polymerization reaction proceeded completely with a 100% conversion. ΔH of this reaction was calculated with various amounts of the initiator, and the peak temperatures were determined at different heating rates. The activation energy (19.7 kcal mol^?1) was also obtained by the Kissinger method for this type of solid polymerization reaction. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1648–1654, 2003     

A novel design of 8-bit adder/subtractor by quantum-dot cellular automata

Application of quantum-dot is a promising technology for implementing digital systems at nano-scale. QCA supports the new devices with nanotechnology architecture. This technique works based on electron interactions inside quantum-dots leading to emergence of quantum features and decreasing the problem of future integrated circuits in terms of size. In this paper, we will successfully design, implement and simulate a new full adder based on QCA with the minimum delay, area and complexities. Also, new XOR gates will be presented which are used in 8-bit controllable inverter in QCA. Furthermore, a new 8-bit full adder is designed based on the majority gate in the QCA, with the minimum number of cells and area which combines both designs to implement an 8-bit adder/subtractor in the QCA. This 8-bit adder/subtractor circuit has the minimum delay and complexity. Being potentially pipeline, the QCA technology calculates the maximum operating speed.     

Fabrication of SiC-Whisker-Reinforced MoSi2 Composites by Tape Casting

In this paper, we describe a procedure for the processing of SiC-whisker-reinforced MoSi₂ composites via tape casting. Based on the characteristics of SiC whiskers and MoSi₂ powder in aqueous and nonaqueous solvents, a slip formulation (solvent, dispersant, binder, etc.) has been developed. The formulation developed allows for a uniform distribution of SiC whiskers in the matrix, easy separation of the tapes from the polymeric carrier, convenient control of both tape thickness and orientation of SiC whiskers, and a low binder burnout temperature. The latter is important for the prevention of the oxidation of MoSi₂ powder during the binder burnout in an oxidizing atmosphere.     

Modeling of protein adsorption to DEAE sepharose FF: Comparison of data with model simulation

The equilibrium and kinetic characteristics of the adsorption of human serum albumin (HSA) and ovalbumin (OVA) to the DEAE Sepharose FF weak anion exchanger were experimentally determined. The rate for protein adsorption was simulated with two different models, the first being based on a single lumped kinetic parameter, while the second includes the individual mass transfer processes occurring prior to the adsorption intervention, i.e., diffusion across the liquid film surrounding individual particles and diffusion within the ion exchanger particle itself. The actual adsorption of OVA to DEAE Sepharose FF in fully mixed stirred vessels and in packed bed columns was consistent with both models. In the case of HSA, however, the adsorption profile in an agitated vessel was consistent only with the pore diffusion model and neither model could correctly predict the latter part of the breakthrough profile observed in packed bed experiments.     

A 60‐GHz on‐chip slot‐array antenna in integrated‐passive‐device technology for antenna‐in‐package applications

A new millimeter‐wave antenna structure on a low‐cost, production platform integrated passive device technology is presented. The antenna consists of a 2‐by‐1 array of slot antennas at 60 GHz. An in‐house developed on‐chip antenna measurement setup was used to characterize the fabricated antenna. The measurement results show an antenna gain of more than 5 dBi with a return loss of 18 dB at 60 GHz. The better‐than‐10‐dB impedance bandwidth of the antenna covers the 60‐GHz unlicensed band from 57 to 64 GHz. The 3‐dB beamwidths of the antenna are 105° and 76° at E‐plane and H‐plane at 60 GHz, respectively. The size of the die of the antenna is 2 mm × 4.5 mm. © 2013 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:155–160, 2014.     

Robust Unknown Input Observer Design for Linear Uncertain Time Delay Systems with Application to Fault Detection

In this paper, a novel approach is proposed to design a robust fault detection observer for uncertain linear time delay systems. The system is composed of both norm‐bounded uncertainties and exogenous signals (noise, disturbance, and fault) which are considered to be unknown. The main contribution of this paper is to present unknown input observer (UIO)‐based fault detection system which shows the maximum sensitivity to fault signals and the minimum sensitivity to other signals. Since the system contains uncertainty terms, an H_∞ model‐matching approach is used in design procedure. The reference residual signal generator system is designed so that the fault signal has maximum sensitivity while the exogenous signals have minimum sensitivity on the residual signal. Then, the fault detection system is designed by minimizing the estimation error between the reference residual signal and the UIO residual signal in the sense of H_∞ norm. A sufficient condition for the existence of such a filter is exploited in terms of certain linear matrix inequalities (LMIs). Application of the proposed method in a numerical example and an engineering process are simulated to demonstrate the effectiveness of the proposed algorithm. Simulation results show the validity of the proposed approach to detect the occurrence of faults in the presence of modeling errors, disturbances, and noise.     

Adaptive tracking with external force disturbance rejection for uncertain robotic systems

This paper is concerned with the tracking control problem of robotic systems perturbed by time-varying parameters, unmodelled dynamics and external force (and moment) disturbances. The upper bound of system uncertainties and disturbances is not required for controller design. Also, no limitations are assumed on the speed of variation and the magnitude of unknown parameters and perturbations. An adaptive algorithm with simplicity and universality properties is proposed to ensure robust tracking. Presenting the closed loop stability proof analytically, the tracking controller is applied to a two-link robot manipulator and the simulation results are demonstrated to show the effectiveness of the method.     

Stabilization of positive switched systems with time-varying delays under asynchronous switching

This paper investigates the state feedback stabilization problem for a class of positive switched systems with time-varying delays under asynchronous switching in the frameworks of continuous-time and discrete-time dynamics. The so-called asynchronous switching means that the switches between the candidate controllers and system modes are asynchronous. By constructing an appropriate co-positive type Lyapunov-Krasovskii functional and further allowing the functional to increase during the running time of active subsystems, sufficient conditions are provided to guarantee the exponential stability of the resulting closed-loop systems, and the corresponding controller gain matrices and admissible switching signals are presented. Finally, two illustrative examples are given to show the effectiveness of the proposed methods.